PPW · String-wound filters
Wound polypropylene cartridges for suspended-particle removal. Confirm micron rating, dimensions, end connection, fluid compatibility and temperature.
Product catalogue ↓Request a quote →
Match your application with a filter family.
Compare filter families and filtration media, then review the compatible product configuration.
Cartridge product families
Request a quote →
CMB · Melt-blown PP filters
Polypropylene depth-filtration cartridges for prefiltration and compatible industrial water duties.
Product catalogue ↓Request a quote →
High Flow Filters · 60 inch
60-inch high-flow filtration cartridges. Confirm the end connection, seal, micron rating, housing compatibility and operating conditions.
Product catalogue ↓Request a quote →
TPP · Pleated PP
Pleated polypropylene cartridges with end-connection and seal options. Confirm the required nominal or absolute rating and material compatibility.
Cartridge filters catalogue ↓Other industrial filtration duties
Gas & liquid coalescing
Separation of dispersed liquids from gas or liquid streams, subject to the selected configuration. Share both phases, flow, viscosity and density where relevant, inlet loading, outlet target, pressure and temperature.
Bag filters
Confirm bag length and diameter, material, ring or collar, micron rating, fluid compatibility, housing, temperature and quantity. Attach a photograph or drawing for replacements.
Prepare your filter enquiry
Provide fluid composition, flow, filtration target, temperature, pressure-drop limits, cartridge length and diameter, end connections, quantity and destination. Include an existing reference or photograph for replacements.
Application data sheets →PPW · String-wound cartridge specifications
| Parameter | Published catalogue options |
|---|---|
| Media / core | Polypropylene yarn; polypropylene or stainless-steel core |
| Micron code options | 1, 5, 10, 20, 30, 50, 75 and 100 µm |
| Length options | 10, 20, 30, 40, 50 and 70 inches; metric variants in the catalogue |
| End configuration | Double open end |
| Ordering example | PPW-P-01-10M-P-25-1 |
Review the ordering guide for length, diameter and core options. Confirm exact dimensions, operating limits and chemical compatibility for the selected model.
View PPW catalogue ↗ · Request this configuration →CMB · Melt-blown cartridge specifications
| Parameter | Published catalogue options |
|---|---|
| Media / structure | Polypropylene; three layers of heat-formed fibres |
| Micron code options | 1, 5, 10, 20, 30 and 50 µm |
| Length codes | 127 mm; metric and inch variants up to 70 inches |
| Temperature conditions | Below 60°C at ΔP 0.03 MPa; below 90°C at ΔP 0.02 MPa |
| Hot-water sterilising | 70°C for 30 minutes |
| Core options | With core or without core |
| Ordering example | CMB-01-10M-25-1-N-F |
Temperature conditions are linked to differential pressure. Confirm dimensions, compatibility and operating limits before specifying.
Review source catalogue ↗ · Request this configuration →High Flow · 60-inch cartridge format
| Parameter | Published catalogue options |
|---|---|
| Diameter | 152 mm (6 inches) |
| Length | 60 inches (1524 mm), subject to model and housing fit |
| Configuration | Coreless; single open end |
| Filtration direction | Inside to outside |
| Media | Pleated media; confirm selected material and micron rating |
Flow rate, pressure, temperature, connection and performance require model-specific confirmation. The catalogue image is a product-family illustration.
Review source catalogue ↗ · Request this configuration →QUALITY & DOCUMENTATION
Quality & Certifications
Explore our quality approach, product certification listings and supporting documents. Certification scope and document applicability depend on the selected product and model.
View quality documentation ↗